Filter
Top Products
Messages
32
Voice mail services vary by service provider. The following instructions are examples
of common operations. Please check with your service provider for specific
instructions on using your voice mail service.
Write down voice mailbox number and process
1. Write down your voice mailbox number.
2. Call and check your voice mail as you normally would.
3. Write down your interaction with the recorded prompts, step-by-step. Keep in
mind that each voice mail service may vary. However, it should look something
like the following:
Dial 8585551212, pause 5 seconds, press 1, pause 2 seconds, press 1234, press #.
Be precise; you will need this information to set up phone numbers with special
dialing requirements. See "Setup phone numbers with dialing codes," p. 38.
Clear voice mail icon
To clear the voice mail icon from the display, in the standby mode, select Menu >
Messages > Voice messages > Clear voice mail icon.
■ Web messaging
Web messaging is a network service. See "Network Services," p. 7.
If your wireless service provider supports this feature, you can use the minibrowser
to check for e-mail messages. In the standby mode, select Menu > Messages >
Minibrowser messages > Connect.
See "Mobile web access," p. 47, for more information on using the minibrowser in
your device to access Web pages.
■ TXT message folders
Save messages
You can save drafts of messages or received messages to an existing folder or to a
folder that you have created.
1. Open the received message, or create a new message; select Options.
2. To save a received message, select Save > Sent items, Archive, Templates, or a
folder you have created.
3. To save the draft of a message you have created, select Save message > Drafts
or Templates.