Filter
Top Products
Settings
60
If you use the Auto-update of date & time option while outside your digital
network, you may be prompted to enter the time manually. Network time will
replace the time and date when you re-enter your digital network.
If your battery has been removed or has discharged outside the digital network,
you may be prompted to enter the time manually (once the battery is replaced or
recharged, and you are still outside of the digital network).
■ Call settings
Location info sharing
Location info sharing is only available for the Nokia 6236i device. Location info
sharing is a network service. See "Network Services," p. 7.
If your wireless service provider supports this feature, then location info sharing
allows the device to share position information over the network. For calls to
emergency numbers, this position information may be used by the emergency
operator to determine the position of the device. The functionality and accuracy
of this feature are dependent on the network, satellite systems, and the agency
receiving the information. This feature may not function in all areas or at all times.
In the standby mode, select Menu >Settings > Call settings > Location info sharing >
911 only or Location on > OK or No.
911 only—This is the default profile. The device location information is shared only
during an emergency call to the official emergency number programmed into your
device. The screen displays in the upper left hand corner of the start screen.
Location on—The device location information is shared with the network whenever
the device is powered on and activated. The screen displays in the upper
left hand corner of the start screen.
Note: Location information will always be shared with the network during
emergency calls to the official emergency number programmed into the
device, regardless of which setting is selected. After placing an emergency
call, the device remains in emergency mode for 5 minutes. During this time,
the location information will be shared with the network. See "Emergency
calls," p. 89.
Anykey answer
Anykey answer allows you to answer an incoming call by briefly pressing any key
except the power, right selection, or end keys.
In the standby mode, select Menu > Settings > Call settings > Anykey answer >
On or Off.