Filter
Top Products
Nokia 6585 User Guide 31 Copyright © 2004 Nokia
Messages (Menu 2)
Call and setup your voice mail
1 Once you have saved the voicemail number, press and hold the 1 key.
2 When you connect to voice mail and the prerecorded greeting begins, follow
the service’s automated instructions to setup your voice mail.
Listen to your voice mail messages
Once you have setup voice mail, you can retrieve your voicemail messages several ways:
• Dial the voice mailbox number using the keypad.
• Press and hold the 1 key.
• Press Listen if there is a notification message in the display.
• At the start screen, select Menu > Messages > Voice messages > Listen to
voice messages.
Once you connect to voice mail and the prerecorded greeting begins, follow the
automated instructions to listen to your voicemail messages.
Automate voice mail
You can insert special characters called “dialing codes” into phone numbers such as
voice mail, and save the number to a 1-touch dialing location. Dialing codes instruct
the receiving system to pause, wait, bypass, or accept the numbers that follow
them in the dialing string.
Note: Voicemail services vary by service provider. The following instructions
are examples of common operations. Please check with your service provider
for specific instructions for using your voice mail service.
WRITE DOWN VOICEMAIL NUMBER AND PROCESS
1 Write down your voice mailbox number.
2 Call and check your voice mail as you normally would.
3 Write down your interaction with the recorded prompts step-by-step. Keep in
mind that each voice mail service may vary. However, it should look something
like this:
Dial 2145551212, pause 5 seconds, press 1, pause 2 seconds, press 1234, press
pound key.
Important: Be precise; you will need this information in “Setup voice mail
with dialing codes” on page 32.
INSERT DIALING CODES
Press the * key repeatedly to cycle through dialing codes. Once the desired code
appears in the display, pause briefly and the code is inserted into the dialing string.