Filter
Top Products
32 Copyright © 2004 Nokia
The following dialing codes are available:
SETUP VOICE MAIL WITH DIALING CODES
1 At the start screen, select Contacts > 1-touch dialing.
2 Scroll to an empty 1-touch dialing slot and press Assign.
3 Enter your voice mailbox number, including the area code.
4 Refer to dialing codes and enter any codes as necessary using the information
that you wrote down from page 31.
For example, if you pause for 5 seconds after connecting to voice mail, enter p
twice after the voice mailbox number, for example, 2145551212pp.
5 Enter any remaining pauses or other information that allows you to listen to
your messages, and press OK.
6 Enter a name (such as Voice Mail) and press OK.
To dial and listen to your voice mail, just press and hold the assigned 1-touch
dialing key at the start screen.
View details of last voice mail
You can view information about your last received voice mail.
At the start screen, select Menu > Messages > Voice messages > View details of
last voice mail.
Clear voicemail icon
To clear the new voicemail icon from the start screen, select Menu > Messages >
Voice messages > Clear voicemail icon.
• MINIBROWSER MESSAGES
Minibrowser messaging is a network service. See “Network services” on page 3 for
more information.
If your wireless service provider supports this feature, you can check for e-mail
messages using the Minibrowser. At the start screen, select Menu > Messages >
Minibrowser messages > Connect.
See “Minibrowser (Menu 10)” on page 65 for more information on using the
Minibrowser in your phone to access web pages.
Dialing code Indicates...
* Bypasses a set of instructions.
p Pauses for 2.5 seconds before sending any numbers that follow.
w Waits for you to press the Talk key before sending the numbers or
codes that follow.