Filter
Top Products
72 Copyright © 2004 Nokia
Emergency calls
Important: Wireless phones, including this phone, operate using radio signals,
wireless networks, landline networks, and user-programmed functions.
Because of this, connections in all conditions cannot be guaranteed. You
should never rely solely on any wireless phone for essential communications
like medical emergencies.
To make an emergency call:
1 If the phone is not on, switch it on. Check for adequate signal strength.
2 Press the End key as many times as needed to clear the display and ready the
phone for calls.
3 Key in the official emergency number for your present location. Emergency
numbers vary by location.
4 Press the Send key.
If certain features are in use, you may first need to turn those features off before you
can make an emergency call. Consult this guide or your service provider. When making
an emergency call, give all the necessary information as accurately as possible. Your
wireless phone may be the only means of communication at the scene of an accident.
Do not end the call until given permission to do so.
• CARE AND MAINTENANCE
Your device is a product of superior design and craftsmanship and should be treated
with care. The suggestions below will help you protect your warranty coverage and
enjoy your device for many years.
• Keep the device dry.
• Do not use or store the device in dusty, dirty areas. Its moving parts and electronic
components can be damaged.
• Do not store the device in hot areas. High temperatures can shorten the life of
electronic devices, damage batteries, and warp or melt certain plastics.
• Do not store the device in cold areas. When the device returns to its normal
temperature, moisture can form inside the device and damage electronic
circuit boards.
• Do not attempt to open the device other than as instructed in this guide.
• Do not drop, knock, or shake the device. Rough handling can break internal circuit
boards and fine mechanics.
• Do not use harsh chemicals, cleaning solvents, or strong detergents to clean
the device.
• Do not paint the device. Paint can clog the moving parts and prevent
proper operation.