Filter
Top Products
48 Copyright © 2004 Nokia
Automatic redial
Occasionally, your network may experience heavy traffic, resulting in a fast busy
signal when you dial. With automatic redial activated, your phone redials the
number up to 10 times, and notifies you once the network is available.
At the start screen, select Menu > Settings > Call settings > Automatic redial >
On or Off.
1-touch dialing
At the start screen, select Menu > Settings > Call settings > 1-touch dialing >
On or Off.
For more information on setting up 1-touch dialing, see “Set up 1-touch dialing”
on page 18.
Automatic update of service
You can program your phone to automatically receive updates from the network
that may improve coverage and performance.
At the start screen, select Menu > Settings > Call settings > Automatic update
of service > On or Off.
Calling card
If you use a calling card for long distance calls, you can save the calling card
numbers in your phone. Your phone can store up to four calling cards.
SAVE INFORMATION
1 At the start screen, select Menu > Settings > Call settings > Calling card.
2 Enter your security code (the default security code is 12345) and press OK.
3 Scroll to one of the four memory locations and select Options > Edit > OK >
Dialing sequence.
4 Select one of the following sequence types:
Access no. + phone no. + card no.—Dial 1-800 access number, phone number,
then card number (+ PIN if required)
Access no. + card no. + phone no.—Dial 1-800 access number, card number
(+ PIN if required), then phone number
Prefix + phone no. + card no.—Dial the prefix (numbers that must precede
the phone number) and phone number you want to dial, then card number
(+ PIN if required)
5 Enter the required information (access number or prefix and card number) and
press OK to confirm your entries.