Filter
Top Products
[ 6 ]
2
Connect the charger to an AC wall outlet.
If the phone is turned on, the messages Charger connected and then
Charging appear. Then the battery power indicator bar starts to flash
up and down (scroll).
• You can use the phone while the battery is charging.
• Important: Disconnect your phone from the charger if the phone
becomes hot while you’re making a call.
• If the battery is totally empty, it might take a few minutes before
the charging indicator appears on the screen.
• The time it takes to charge the battery depends on the charger you
use.
The battery is fully charged when the battery indicator bar stops
scrolling and the Battery full message appears (if the phone is on).
3
Disconnect the charger from the AC outlet and the phone.
When the charger is not in use
• When a charger is not in use, disconnect it from the power source.
• Do not leave the battery connected to a charger for longer than a
week, since overcharging the battery could shorten its lifespan. If left
unused, a fully charged battery will discharge itself over time.
• When you need to remove
the battery
Later on, you may need to remove the battery.
1
Make sure the phone is off.
2
Remove the phone’s back cover,
grasp the ridge at the end of the
battery with a fingernail, and lift
the battery out.