Filter
Top Products
[ 48 ]
Store touch tone sequences (strings)
You store touch tone strings the same way that you store names and
numbers in your phone book. You can store an entire digit sequence and
send it as touch tones for frequently used strings of numbers.
Store touch tone strings with phone numbers
1
Enter the phone number that you want associated with a touch tone.
2
Press w or p where needed.
w (wait): When you dial this phone number,
your phone first dials the number, then waits
(because of the w character) for you to press
Send. When you press Send, the phone sends
your touch tone.
p (pause): If you include a p character instead of a w, your phone
pauses for 2.5 seconds, then automatically sends your touch tone.
3
Enter the touch tone string.
4
Store the number as you normally would.
Send a touch tone string
1
Press Menu 4 > 2 > 3 > 1 (Settings > Phone settings > Touch
tones > Manual touch tones).
2
Make sure that the setting is not set to Off.
If it is, use or
to scroll to one of the other options and
press OK.
3
Then, during your call, press Options, scroll to Touch tones and
press OK.
4
Enter the touch tone string or recall the string from the phone book,
and press OK.
Warning:
If you send touch tones while in the analog mode, be careful
not to send confidential information.