A SERVICE OF

logo

Open as PDF
next previous
4
English
5
English
5
3
2
Compatible chargers:
•
Nokia AC-1
•
Nokia ACP-8
•
Nokia ACP-9
•
Nokia ACP-12
•
Nokia LCH-12
•
Nokia ACP-7
Turning your headset on and off
•
Press
the answer/end button
(See fig. 1)
to turn on your headset.
•
Press
and hold
the answer/end button to turn off your headset.
Pair it with your phone
Before you use your N-Gage Wireless Dual Headset, you need to pair it with
your
mobile phone.
1.
Put the headset in pairing mode
•
Make sure the headset is on.
•
Press and hold
(5 sec) the pairing button marked
(See fig. 1).
LED turns solid to indicate pairing mode.
2. Set your mobile phone to ‘discover’ the N-Gage Wireless Dual Headset
Follow your mobile phone’s user guide. This usually involves going to a ‘setup,’
‘connect’ or ‘Bluetooth’ menu
on your mobile phone
and selecting the option to
‘discover’ or ‘add’ a Bluetooth device.
(See fig. 4).
3. Your mobile phone will find the N-Gage Wireless Dual Headset
Your mobile phone then asks if you want to pair with it. Accept by pressing ‘Yes’
or ‘OK’ on the mobile phone and confirm with
the
passkey or PIN
=
0000
(4 zeros).
Headset confirms a successful pairing by 5 LED flashes and confirmation sound. In case
of pairing failure only the sound will be heard, no LED. In case of unsuccessful pairing,
repeat steps 1 to 3.
Wear it how you like it
Wear it how you like it
Wear it how you like it
4
Wear it how you like it
4
The N-Gage Wireless Dual Headset is ready to wear on your right ear. If you prefer the
left,
gently rotate the speaker house to fit left ear. (
See fig. 2).
To use both earpieces attach the additional earpiece to the Bluetooth unit. Note: when
using both earpieces the Bluetooth unit must be worn on the right ear.
For optimal performance, wear the N-Gage Wireless Dual Headset and your
mobile phone within line of sight. In general, you will get better performance
when there are no obstructions between your headset and your mobile phone.
How to…
Answer a call
•
Tap
the answer/end button
(see fig.
1)
on your headset to answer a call.
End a call
•
Tap
the answer/end button to end an active call.
Make a call
•
When you make a call from your mobile phone, the call will automatically
transfer to your headset.
Reject a call
•
Press
the answer/end button when the phone rings to reject an incoming call.
Depending on your phone settings, the person who called you will either be
forwarded to your voice mail or hear a busy signal.
Activate
voice dialling
•
Tap
the answer/end button
.
For best results, record the voice-dialling tag
through your headset. Please consult your phone’s user guide for more
information about using this feature.
Redial last number
•
Press
the answer/end button
.
Adjust sound and volume
•
Press
the volume up or down (+ or -) to adjust the volume. (
See fig 1.)