Filter
Top Products
Operation in hands-free mode
22
First use
When you switch on the ignition after installation of the car kit
or after selecting Restore factory settings?, the car kit
automatically switches on.
Set the display language and usage mode
If you have not assigned a usage mode to the active user profile,
you are prompted to select the desired display language to be
used in the car kit for the active user profile.
When Usage mode is displayed, select Bluetooth phone.
The car kit automatically begins to search for a compatible
mobile phone. The devices found in the search are displayed in
a list. Select the desired mobile phone from the list of devices
found and start the pairing operation. To do so, you must enter
the same Bluetooth passcode on both devices to be paired. You
can make up your own passcode if desired. For further
information, see “Pairing” on page 60
Note
If the mobile phone selected also supports the SIM
access profile standard, SIM access mode is
automatically set as the usage mode. For further
information, see “Operation in SIM access mode” on
page 17.
Download contact entries from the mobile phone
The car kit asks whether you wish to copy the contact entries
stored on the remote SIM card and in the compatible mobile
phone to the car kit memory. The contact entries in the car kit
are overwritten. For further information, see “Download
settings” on page 68.
Note
When selecting this mode, you must either deactivate
the option Request authorisation in the mobile phone or
authorize the connection in the mobile.
Note
Please note that the contact entries from both the SIM
card of the mobile phone and the internal phone
memory are downloaded.
Ready for operation
When the car kit is successfully paired with the compatible
mobile phone, it is operable in the hands-free mode.