Palm i700 Cell Phone User Manual


 
Viewing Preferences
181
To edit the IR to Phone connection:
1. Select the IR to Phone connection and tap Edit.
2. Tap Details.
3. Tap the Speed pick list and select the appropriate speed.
4. Enter the initialization string supplied by the documentation for the modem
attached to your mobile phone, if necessary.
5. Tap OK, and then tap OK again to save the configuration.
After you create the configuration, you need to set up the HotSync Manager of
your Desktop application and the HotSync application of your handheld to
perform a modem HotSync operation.
Network preferences and TCP/IP software
Although your handheld is wirelessly enabled, you can also use TCP/IP software
that is included in the handheld operating system to connect with Internet Service
Providers (ISPs) or dial-in (remote access) servers. You will need an optional
modem accessory that also supports TCP/IP settings.
To use TCP/IP, you must create a configuration in Connection Preferences and
then create Network Preferences settings.
The Connection Preferences screen enables you to define several ways that your
handheld can use the a modem to communicate with remote devices. For example,
you can communicate with your ISP server, or with your computer if you are away
on travel. See Connection preferences earlier in this chapter for a complete
explanation on how to create modem configurations.
Tap here