Filter
Top Products
Disabling the Alarm
1 From Idle
FQ
, select Applications > Clock Function >
Alarm Set
FQ
2 Use
e
to select the alarm to be disabled
FQ
three times
3 Use
e
to select Disabled
FQ
When disabled, following the same procedure will re-enable the alarm.
Adjusting the Alarm Time
1 From Idle
FQ
, select Applications > Clock Function >
Alarm Set
FQ
2 Use
e
to select the alarm to be adjusted
FQ
3
F
+ Hold
B
to remove the current alarm time
4 Enter the digits for the time
FQ
twice
5 Use
e
to select the frequency of the alarm
FQ
6 Use
e
to select the ring type
FQ
Setting a Power On/Off Time
The phone can be set to turn itself on or off
automatically at a specified time using the Power
On/Off feature. The procedure for setting/adjusting
the Power On/Off automatically is similar to that for
setting the time on the clock. For either setting or
adjusting the time needed to select Power On
Time or Power Off Time in the Clock Function
menu.
Caution: Ensure that the setting of the Alarm or Power On function will
not contravene any regulations whereby it may automatically power on
when in an aircraft or medical facility etc. - see “Important Information”
page i.
34
Applications