Filter
Top Products
Using the PIN
The PIN (Personal Identification Number) protects your SIM against
unauthorized use. If you enable the PIN, every time the phone is
turned on you will be prompted to enter the PIN.
The PIN2 controls security for the Fixed Dial Store, Call Charge
metering and Barred Dial.
Enabling/Disabling the PIN
1 From Idle mode press Q, select Phone Menu > Security >
PIN and press Q
2 Use a select Enable / Disable or Change the PIN and press
Q
3 Enter PIN (Between 4 and 8 digits) and press Q
Setting Vibration Alert
When vibration alert is switched on the phone will vibrate when a call
is received. Switching on vibration alert will silence the ring volume.
If, however, the ring volume is adjusted after the vibration alert is
switched on, the phone will ring and vibrate when a call is received.
From Idle mode:
Press and hold # to switch on or off. When activated, the
phone will vibrate briefly.
Setting Ring and Key Volume
Changing either the ring volume and key volume is done in the same
manner. If you increase the ring volume above maximum it will set an
escalating ring tone. If you turn the ring volume off, the silent
indicator icon ([) will be displayed.
1 From Idle mode press Q, select Personalise > Tones and
press Q
2 Select Ring Volume or Key Volume and press Q
3 Use e to set the volume level and press Q
11
Basic Operation