Filter
Top Products
48
Settings
Settings
Menu > Settings > Security
Security
Setting and cancelling the phone lock
When the phone lock is set you can only use the phone to receive incoming calls and to
make emergency calls.
Select Phone Lock > On/Off > On.
Enter the lock code.
The lock icon (O) is displayed on the screen.
When the phone lock is on you have to enter the lock code from the idle screen before
you can use the phone.
To cancel the phone lock:
Select Phone Lock > On/Off > Off.
Enter the lock code.
Changing the phone lock code
You can change the phone lock code to a four figure number that you find easy to
remember.
Select Phone Lock > Change Code.
Enter the current phone lock code.
Enter the new phone lock code.
Verify the new phone lock code.
Note: You can also set the phone lock by holding down Q on the idle screen, then
following the instructions below.
Note: The phone lock code is preset to 0000. For security, you should change this to your
own four-figure number, see Changing the phone lock code on page 48.
Security
Phone Lock Call Bar PIN Fixed Dial Barred
Dial
PIN2