Pantech PG - 3600V Cell Phone User Manual


 
When your battery is fully charged,
remove the adapter connection from
the outlet, then disconnect the adapter
from your phone by pressing the
adapter’s side buttons and pulling
the adapter away from the phone, as
shown on the right.
Getting the best from your battery
Do not use a damaged battery or charger.
Use your battery for the specified purpose only.
The closer you are to your network’s base station, the
longer the phone usage time because less battery
power is consumed for the connection.
The battery recharging time varies depending on the
remaining battery capacity and the battery and charger
type you use.
Battery life inevitably shortens over time.
Use an authorised battery and charger only.
Since overcharging may shorten battery life, remove the
battery from its charger once it is fully charged. Unplug
the charger, once charging is complete. Leaving the
battery in hot or cold places, especially inside a car in
summer or winter, may reduce the capacity and life
of the battery. Always keep the battery within normal
temperatures.
Do not bring your battery into contact with conductive
objects (“earth”.) Similarly, do not bring your phone
into contact with conductive objects as this may also
damage your battery.
Dispose of and recycle used batteries in accordance
with local regulations. Do not dispose of batteries by
burning; they may explode.
Do not use an unauthorised charger.
To prevent injury or burns, ensure that no metal objects
come into contact with the + and – terminals of the
battery.
Battery
Battery
18
Tip
Your phone is powered by a Lithium Ion (Li-Ion) battery.
This means that, unlike other forms of battery technology, you can
recharge your battery while some charge remains without
reducing your phone’s autonomy due to the “battery memory
effect” inherent in those technologies.
060425-PG-3600V-EN�‚�¬(00).indd 18 2006.4.27 7:7:16 PM