Philips E-GSM 900 Cell Phone User Manual


 
44 Settings
the selected profile will be used to connect to the
GSM or GPRS network.
Options described below are operator and/or
subscription dependent. Error messages during
connections are mainly due to incorrect parameters:
contact your operator before first use, in order to have
the appropriate settings, which you may receive by
SMS in some cases. Some pre-configured profiles
might be locked, preventing re-programming and
renaming.
Select an item in the list and press
,
to access the
following options:
GPRS attach
This menu allows you to define how your mobile
phone connects to the GPRS service.
Register again
Provides you with a list of the networks available in
the area when the Manual mode is selected. Select the
Change name To rename the selected profile.
Show To display all parameters of the
selected profile.
GSM Settings To change the GSM settings:
Login & Password,
Phone number needed to
establish the connection and
provided by your operator
(ISDN or Analogue),
Inactivity time, a value of over 30
seconds after which the phone
disconnects automatically (if a
connection was in progress).
GPRS settings To change the GPRS settings:
Login, Password, Inactivity time
•the APN menu allows you to
enter the address of the external
data network you want to
connect to, a text string used to
establish the connection.
Always on Your phone automatically connects
to the GPRS service (if available).
This option allows quicker access
to GPRS features, but increases
energy consumption.
For data calls Your phone will connect to the
GPRS service only when required.
This option reduces energy
consumption, but increases the
connection delay.
Philips362-V2_GB_4311 255 63391.book Page 44 Mardi, 5. juillet 2005 2:42 14