Philips DECT 629 Cell Phone User Manual


 
Declaration of conformity
11
Philips has marked the battery and packaging with standard symbols designed to promote the recycling and appropriate
disposal of your eventual waste.
A financial contribution has been paid to the associated national recovery & recycling system.
The labelled packaging material is recyclable.
DECT
TM
is a Trade Mark of ETSI registered for the benefit of the implementers of the DECT technology.
We,
PHILIPS Consumer Electronics
Route d'Angers
72081 Le Mans Cedex 9
France
Declare that the products DECT62xx are in compliance with ANNEX IV of the R&TTE-Directive
1999/5/EC and then with the following essential requirements :
Article 3.1 a: (protection of the health & the safety of the user)
Safety: EN 60950-1 (10/2001)
SAR: EN 50371 (2002)
Article 3.1 b: (protection requirements with respect to electromagnetic compatibility)
EMC : ETSI EN 301 489-6 V1.2.1 (08/2002) & ETSI EN 301 489-1 V1.4.1 (08/2002)
Article 3.2: (effective use of the radio spectrum)
Radio : EN 301 406 V1.5.1 (2003)
The presumption of conformity with the essential requirements regarding Council Directive
1999/5/EC is ensured.
Date : 20/05/2005 Le Mans
Product Quality Manager
Home Communication
Using GAP standard compliance
The GAP standard guarantees that all DECT
TM
GAP handsets and base stations comply with
a minimum operating standard irrespective of their make.Your DECT 623/627 handset and
base station are GAP compliant, which means the minimum guaranteed functions are :
register a handset, take the line, receive a call and dial.The advanced features may not be
available if you use another handset than a DECT 623/627 with your base station (except
with DECT 723/727 handsets).
To register and use your DECT 623/627 handset with a GAP standard base station of a
different make, first follow the procedure described in the manufacturer’s instructions, then
follow the procedure described on page 43.
To register a handset of another make to the DECT 623/627 base station, place the base
station into registration mode (page 43), then follow the procedure in the manufacturer’s
instructions.
Declaration of conformity
0168
DECT623_627_GBIE_part1.qxd 14.07.2005 16:05 Seite 11