Filter
Top Products
SMS
19
The sent SMS can be up to a maximum of 640 characters long.The DECT 623/627 can store 20
SMS messages of 160 characters each in the draft folder and in the Outbox.
SMS stands for Short Message Service.To benefit from this service you must subscribe to the
Caller Line Identification Service (CLI) together with the SMS service from your network
provider. SMS messages can be exchanged with a phone (mobile or compatible fixed lines), a fax
or an
Email address provided the receiver has also subscribed to the CLI & SMS services.
Your DECT 623/627 factory settings correspond to the main national operator. If you
wish to send or receive SMS through another service provider you must set the
corresponding numbers (see page 25 and the SMS leaflet).
To write and send an SMS to a phone
Select Write a SMS option and press SELECT.
Enter the phone number and press OK or press LSK PHBK and
scroll to retrieve the number from the Phonebook list (to send SMS from
phonebook, see page 30).
Write and send new SMS
Important informations are also
available on the SMS leaflet in the box
Select Send, otherwise
if you want to store your SMS, scroll to Save as Draft and press SELECT.
The SMS stored can be later retrieved from Draft folder.
Enter the text and press OK (see page 18).
Note :To delete a wrong character, press CLEAR.You can delete and change any
character by simply moving the cursor to the left
or to the right to reach the
character and pressing CLEAR once.
If you enter more than 640 characters for an SMS you will hear an error beep.
SMS
Write a SMS
Inbox
Outbox
Draft
SMS settings
Default Center
Press to reach the menu list and press SELECT.
DECT623_627_GBIE_part1.qxd 14.07.2005 16:05 Seite 19