Philips E-GSM 1800 Cell Phone User Manual


 
Getting Started 1
1. Getting Started
Please read the safety instructions in the "Precautions"
section before use.
To use your phone, you must insert a valid SIM card
supplied by a GSM operator or retailer. The SIM card
contains your subscription information, your mobile
telephone number, and a memory in which you can
store phone numbers and messages (for more
information, see “Address book” on page 52).
Inserting the SIM card
Remove the back cover
To insert the SIM card, you must first remove the
back cover. Press on the clips and then lift the cover as
shown below.
Remove the battery
To remove the battery, press the inner clips outwards,
then remove the battery by pulling it up from the
bottom.
You may lose all your personal settings if you remove
the battery when the phone is switched on.
Insert the SIM card
Slide the SIM card holder to unlock it. Remove the
SIM card from its protective holder and place it in the
space provided, making sure that the clipped corner of
the card is in the correct corner and that the gold
contacts are facing down. Slide the card holder into
the locked position.
Philips362-V2_GB_4311 255 63391.book Page 1 Mardi, 5. juillet 2005 2:42 14