Philips MT3120 Cell Phone User Manual


  Open as PDF
of 30
 
8 EN
Note
• You can nd the passcodes/PIN in the manual of your
original cordless phone with base (unless you changed
the standard PIN code).
• This phone is only able to connect to a base station
with the correct passcodes/PIN.
• If the passcodes/PIN is incorrect or no base is found
within a certain period, your handset displays a
notication message. Repeat the above procedure if
registration fails.
Set the date and time
Tip
• To set the date and time later, tap to skip this setting.
Your phone automatically asks you to set date
& time when you turn it on the rst time. If you
need to change the date and time, refer to the
steps below.
Set the date
1 Tap to access the main menu screen.
2 Select > [Phone] > [Date & time] >
[Set date], then tap
to conrm.
3 Tap / once or several times to enter
the date, then tap to conrm.
Set the time
1 Tap to access the main menu screen.
2 Select > [Phone] > [Date & time] >
[Set time], then tap
to conrm.
3 Tap / once or several times to enter
the date, then tap to conrm.
Set the date format
1 Tap to access the main menu screen.
2 Select > [Phone] > [Date & time] >
[Date format], then tap
to conrm.
3 Tap to select a date format, then tap to
conrm.
Set the time format
1 Tap to access the main menu screen.
2 Select > [Phone] > [Date & time] >
[Time format], then tap
to conrm.
3 Tap to select a time format, then tap to
conrm.
Charge the phone
Plug the charging adapter into the headset/
charging jack at the bottom of the phone.
» The handset starts charging.
Note
• Make sure that you switch on the phone for charging, it
only charges when switched on.
• Before rst use, charge the battery until the display
indicator shows a full charge.
• The phone might get warm while the batteries are
charging. This is normal.
• If your phone's battery has depleted completely after
long periods of non-use, it may take up to 20 minutes
for the phone to recharge until it powers up.
Your phone is now ready to use.
Check the battery level
The battery icon displays the current battery
level.
 previous next