Filter
Top Products
7
ENGLISH
1 Turn the rotary wheel to
select a device
from the list, press
OK
and
add a key press to the activity.
2 Turn the rotary wheel to select ‘
3 seconds
’ delay and press
OK
.
3 Turn the rotary wheel to select ‘
no delay
’ and press
OK
.
4 Repeat step 3 to create the activity.
The activity is added to your remote control.You can select the activity by
turning the rotary wheel.
Delete an Activity
You can delete an activity from your remote
control.
1 Select the option
Delete an activity
in the Setup menu and press .
2 Select the activity you want to delete.
3 Confirm you want to delete the activity.
The activity is deleted.
The activity is available again in the list of activities that you can add.
Change Language
You can change the language of your remote
control to one of the following languages:
■ English; ■ French; ■ German; ■ Spanish.
1 Select the option
Change language
in the Setup menu and press .
2 Select the language you want to use on your remote control.
3 Confirm the selected language.
The language used in the Setup menu is changed.
Backlight Time Out
When you use the remote control, the backlight,
the touch screen and the upper part of the
display are switched on. After 5 seconds these
components are switched off again.
You can change this time out setting to one of the following options:
■ 3 seconds; ■ 5 seconds; ■ 10 seconds; ■ 15 seconds.
1 Select the option
Backlight timeout
in the Setup menu and press .
2 Select your desired backlight time.
3 Confirm the new time out.
The time out is changed for your remote control.
Note The backlight time out has an impact on the lifetime of the batteries, the
longer the backlight stays on, the faster the batteries will be drained.
Copy Volume
After adding devices, the SRU9600 automatically
copies the Volume keys, as follows:
■
Video
devices, like DVD, DVDR,VCR and Satellite box, use the Volume keys
of the
TV
(provided that you have programmed a TV).
■
Audio
devices, like CD, MD,Tape and Tuner, use the Volume keys of the
Amplifier
or
Receiver
(provided that you have programmed an Amplifier
or Receiver).
You can change which Volume keys are used, for instance when you want to
use the Volume keys of the Amplifier for the DVD.
1 Select the option
Copy volume
in the Setup menu and press .
2 Select the device you want to copy the Volume keys from (e.g.TV or Amp).
3 Select the device you want to copy the Volume keys to (e.g. DVD or SAT
box).
4 Confirm you want to copy the Volume keys from one device to the other.
The Volume keys are copied.
SRU9600_IFU_EU_v02.qxd 20-01-2006 09:22 Pagina 7