Filter
Top Products
13
USING TONE SERVICES
WITH A SERVICE
NUMBER
Some special services, such as bank
by phone, require tone signals. If you
have pulse service, you can still use
these special tone services by follow-
ing these steps.
1. Set
TONE/PULSE
on the base to
PULSE
.
2. Dial the service’s main number.
3. When the service answers, press
(S). Then dial the additional num-
bers. The phone sends these
numbers as tone signals.
4. When you complete the call, place
the handset on the cradle or press
TALK
to disconnect the call. The
phone automatically resets to the
pulse mode.
Note:
We recommend you not use
RE-
DIAL
to dial numbers that include a
TONE
entry.
USING PAGE
PAGE
lets you locate the handset if you
misplaced it, or alert the person hold-
ing the handset. The handset sounds
four beeps when someone presses
PAGE
on the base. The IN USE indica-
tor and the selected channel appear on
the base’s display.
Note:
The handset will not beep during
a call, or if the ringer is off.
43-1031.fm Page 13 Tuesday, August 17, 1999 9:24 AM