Radio Shack ET-531 Cell Phone User Manual


 
5
PREPARATION
INSTALLING THE
BATTERY
Before you use your phone for the first
time, you must install and connect the
battery, then charge it for about 12-15
hours.
To install the battery, slide off the bat-
tery compartment cover on the back of
the handset. Place the battery in the
compartment, then connect the battery
to the pins inside the battery compart-
ment.
Then install the handset’s antenna, re-
place the cover, mount the phone (see
“Selecting a Location”), and follow the
instructions under “Charging the Bat-
tery.”
INSTALLING THE
HANDSET’S ANTENNA
Insert the antenna into the hole at the
top of the handset, then rotate the an-
tenna clockwise until it is secure.
SELECTING A LOCATION
You can place your phone on a desk,
shelf, or table, or mount it on a wall.
Select a location that is:
Near an AC outlet
Near a telephone line jack
Out of the way of normal activities
Away from fluorescent lights, elec-
trical machinery, electrical appli-
ances, and metal walls or filing
cabinets
Away from computers, remote
control toys, wireless intercoms,
alarms, and room monitors.
The base’s location affects the phone’s
range. If you have a choice of several
locations, try each to see which pro-
vides the best performance.
Notes:
If the phone line jack is not a mod-
ular jack, you must update the wir-
ing. You can do this yourself,
using jacks and adapters avail-
able at your local Radio Shack
store, or you can let the phone
company update the wiring for
you.
The phone company will charge
you for the installation of the nec-
essary jacks.
43-1031.fm Page 5 Tuesday, August 17, 1999 9:24 AM