Sagem myC5-2 Cell Phone User Manual


 
13
Activating your phone
The SIM card is inserted under the phone's battery. Ensure that the
phone is switched off and the charger disconnected.
Turn to the phone’s back and push the lock button.
Remove the back cover by sliding it downwards.
Take out battery by pushing the button upwards.
Slide the SIM card, with cut corner as shown on the phone, into the card
holder with fold face down.
Slide the little latch to settle the SIM card.
Place the battery by positioning first the lower part.
Replace the back cover by sliding it upwards.
When you switch on your phone for the first time, you must configure it
with various settings that will remain by default until you choose to
modify them (depending on model).
After entering your PIN code and the date and time, make your choice
for the following settings: time zone, daylight savings, skin, wallpaper,
screensaver, ring tone, volume, vibrate and voicemail number.
If there are contacts saved in your SIM card, you are invited, if you wish,
to copy them in the phone contacts memory.
Installing the SIM card and the battery
Getting started
2
1
3
4
5
6
1
2
3
4
5
6
251729200_myC5-2_lu_en.book Page 13 Lundi, 4. octobre 2004 11:21 11