Filter
Top Products
12 Description
Inserting the memory card (microSD™)
1 Turn the phone on to its back and slide the lock button up, then unclip the back cover.
2 Remove the front cover by pushing on the two side clips.
3 Insert the memory card pushing it until you hear a «click ».
Note:
Take care not to mark the display screen with your fingers.
4 Hold the front cover facing down. Place the keypad into that, and then clip the electronic board into place, first at the top
and then down the side and at the bottom. Replace the back cover.
5
Important:
Slide the rear-cover lock button back down again into the lock position.
6 To remove the memory card, carefully press it in to make it pop out.
Using the memory card
The memory card is very fragile. Take care when you insert or remove the memory card.
Some memory cards must be formatted with a PC before first use with the phone.
12 3
Charger and
4 56
accessories
connector
Memory card slot
252244508_myV-76_en.book Page 12 Vendredi, 5. août 2005 1:18 13