Filter
Top Products
6
7
Set Up Your Samsung Jack™ Set Up Your Samsung Jack™
What’s in the Box?
To get started, we recommend the following:
Carefully follow the step-by-step instructions in this guide to •
set up your device.
Review the User Manual (by clicking the proper link) •
on the Getting Started CD to learn about the full power
of the Samsung Jack™.
Take note of the following components included in the box:
Insert the SIM Card
1. Remove the battery cover then remove battery.
2. Slide SIM face up (gold contacts face down) into SIM slot.
3. Replace battery and battery cover.
Insert microSD™ Card
A microSD Card is a removable memory card that will increase data storage capacity of the device.
1. Remove the battery cover then remove battery.
2. Slide the narrow end of the microSD™ Card into the slot marked microSD, with gold
contacts facing down,
3. Replace battery and battery cover.
Note: microSD™ Card sold separately.
Insert Battery
1. Remove the battery cover.
2. Align the contacts on the battery with the contacts on the back of the device.
3. Push the battery down until it locks into place.
4. Replace the battery cover.
Charge Battery
1. Plug the charger into a standard AC wall outlet.
2. Plug the charger into the jack on the right side of the phone. The indicator light on the
front upper right of device is red while charging, and green when fully charged.
Note: When charging is complete, unplug the charger from the power outlet.
Lithium Ion
Battery
Charger
USB Cable
AT&T & OEM Branded CD
Getting Started
CD
Samsung Jack™
Incorrect
Correct
Incorrect
Correct