Filter
Top Products
51
connectivity
Connect via USB
Set a default action for your USB
connection
To set your device to perform a default action
when you connect the device to a PC with the
PC data cable,
1. In Standby mode, press [ ] →
Connectivity → USB → USB connection
mode.
2. Set the default USB mode (PC Studio,
Mass storage, Image transfer, or Media
transfer).
Use PC Studio
1. Change the USB connection to PC Studio.
2. Connect your device to a PC with the PC
data cable.
3. Run PC Studio and manage personal data
and media files.
Refer to the PC Studio help for more
information.
Copy files to a memory card
1. Insert a memory card into the device.
2. Change the USB connection to Mass
storage.
3. Connect your device to a PC with the PC
data cable.
4. Select Open folder to view files when a
pop-up window appears on your PC.
5. Copy files from the PC to the memory card.
6. When you are finished, disconnect the
device from the PC.
You can also set your device to
Ask on
connection
, instead of using a default USB
mode. If you use this setting, your device will
prompt you to choose the USB mode every
time you connect to a PC.