Filter
Top Products
Settings 111
3. Use the navigation key to highlight a menu.
4. Press to display the menu’s options and change the
settings as desired.
Service LED
Use the Service LED menu to set your Service LED to either
on or off. The Service LED has the following functions:
• Flashes to indicate an incoming call or message.
• Lights momentarily when you power up the phone and
flashes when your phone needs charging.
1. In standby mode, press the left soft key ( ) Menu.
2. Press (Settings), (Display),
(Service
LED).
3.
Use the navigation key to highlight On or Off, then press
. Your setting is saved.
Keypad
Set the time for which the keypad backlight remains on
after a period of inactivity. Optional settings are 5, 10,
15 seconds, and Folder Open.
Power
Save
Internal (Main) LCD
Unless the backlight setting for the LCD has been
changed, the backlight dims after a minute of inactivity,
and then turns off. With Power Save enabled, the back-
light for the LCD is always dim. After one minute of
inactivity, Power Save turns the backlight off.
External (Sub) LCD
With Power save On and the flip closed (while not in a
call), the external LCD turns off to conserve power. With
Power save Off and the flip closed (while not in a call),
the external LCD remains on when the flip is closed.
Option Function