Filter
Top Products
Phone Settings
140
Various codes and passwords are used to protect the features of your
phone. They are described in the following sections. Also see pages
“Access Codes” on page 147.
PIN Check
When the PIN Check feature is enabled, you must enter your PIN
each time you switch the phone on. Consequently, any person who
does not have your PIN cannot use your phone without your
approval.
Note: Before disabling the PIN Check feature, you must enter your PIN.
The following options are available:
♦Disable: the phone connects directly to the network when you
switch it on.
♦Enable: you must enter the PIN each time the phone is switched
on.
Change PIN
This feature allows you to change your current PIN to a new one,
provided that the PIN Check feature is enabled. You must enter the
current PIN before you can specify a new one.
Once you have entered a new PIN, you are asked to confirm it by
entering it again.
Phone Lock
When the Phone Lock feature is enabled, the phone is locked and you
must enter an 8-digit phone password each time the phone is
switched on.
The password is preset to “00000000” at the factory. To change the
phone password, see the Change Password menu (Menu 9.5.4)
below.
Once the correct password has been entered, you can use the phone
until you switch it off.
The following options are available: