Filter
Top Products
Section 8
118
Disable: the phone connects directly to the network when
you switch it on.
Enable: you must enter the PIN each time the phone is
switched on.
Change PIN
This feature allows you to change your current PIN,
provided that the PIN Check feature is enabled. You must
enter the current PIN before you can specify a new one.
Once you have entered a new PIN, you are asked to
confirm it by entering it again.
Phone Lock
When the Phone Lock feature is enabled, the phone is
locked and you must enter the 4- 8 digit phone password
each time the phone is switched on.
Note: The password is preset to “00000000” at the factory. To change the
phone password, see "Change Password" on page 119.
Once the correct password has been entered, you can use
the phone until you switch it off.
The following options are available:
Disable: you are not asked to enter the phone password
when you switch on the phone.
Enable: you are required to enter the phone password
when you switch on the phone.
p777.book Page 118 Wednesday, April 6, 2005 10:48 PM