Filter
Top Products
68
Adjusting the Call Volume
During a call, to adjust the volume, use the Volume key on
the left side of the phone.
Ⅲ
Press the
Up
end of the volume key to increase the
volume level and press the
Down
end of the volume
key to decrease the volume level.
– or –
Quickly add more volume to the incoming audio by
touching the on-screen
Extra volume
button .
From a Home screen, you can also adjust the ringer volume
using these same keys.
In-Call Options
During an active call there are several functions available by
touching a corresponding on-screen button.
•
Add call
: Display the dialer so you can call another person.
•
Keypad
: Display the on-screen keypad, where you can
enter number using DTMF (Dual Tone Multi-Frequency).
•
End call
: Terminate the call.
•
Speaker
: Route the phone’s audio through either the speaker or
through the earpiece.
–
Touch
Speaker
to route the audio through the speaker. (You
can adjust the speaker volume using the volume keys.) A green
line will appear under the Speaker button.
–
Touch
Speaker
again
to use the phone’s earpiece (see “Using
the Speakerphone During an Active Call” on page 70). The
green line will disappear when Speaker is not activated.
•
Mute/Unmute
turn the onboard microphone either on or off.
–
Touch
Mute
during a call to mute the microphone. A green line
will appear under the Mute button.
–
Touch
Mute
again to unmute the microphone. The green line
will disappear when Mute is not activated.
•
Headset
connects to a Bluetooth headset.
–
Touch
Headset
during a call to activate a Bluetooth headset. A
green line will appear under the Headset button.
–
Touch
Headset
again to de-activate the Bluetooth headset. The
green line will disappear when the Headset is not activated.
• Touch
Menu
for more options:
–
Contacts
: Go to your Contact list.
–
Memo
: Write a memo.
–
Message
: Write a message during a call.
DRAFT - For Internal Use Only