Filter
Top Products
Getting Started
20
2. Plug the adapter into a standard AC wall outlet.
3. When charging is finished, unplug the adapter
from the power outlet and from the phone by
pressing the gray tabs on both sides of the
connector and pulling the connector out.
Note:
Do not remove the battery from the phone
without unplugging the adapter while it is
charging. If you do this, the phone may be
damaged.
Low Battery Indicator
When the battery is weak and only a few minutes of
talk time remain, you will hear a warning tone and
a message will be repeated at regular intervals on
the display:
When the battery becomes too weak for the phone
to operate, it switches off automatically.
**Warning**
Low Battery
Menu Name
Getting Started
21
Switching the Phone On/Off
1. Open the folder.
2. Hold down the key until the phone
switches on.
3. If the phone asks for a password, enter the
password and press the
OK
soft key. The phone
password is factory set to “00000000.” For
further details, see page 122.
4. If the phone asks for a PIN, enter the PIN and
press the
OK
soft key. For further details, see
page 123.
The phone searches for your network and when
it finds the network, the idle screen, illustrated
below, appears on each display. Now, you can
make or receive a call.
Note
: The display language is preset to English at the
factory. To change the language, use the
Language
menu option (
Menu 6.5
); for
further details, refer to page 92.
5. When you wish to switch the phone off, hold
down the key until the power-off image is
displayed.
Service Provider
05:17
Mon 26 May
Menu Name
05:17
Mon/26