Filter
Top Products
Connect, Sig. Fade Tone or Power on/off
6. Select On or Off, and press <OK>.
Adjusting Key Tone Level
The keys on your phone beep when they are pressed. You can
adjust the volume of the beeps or turn them off when you do not
want the keys to beep at all.
1. From Standby mode, press <Menu> softkey for the Main menu.
2. Select 1:Settings.
3. Select 2:Sounds.
4. Select 5:Key Tone Level.
5. Scroll to the desired key volume and press <OK> to select.
Setting Tone Length
The tone length setting enables you to select Normal or Long
DTMF (Dual-tone multi-frequency) tones. When you use a
teleservice, such as your bank account, and press the keys to
enter numbers into the teleservice, you are sending DTMF tones.
The system used by the bank or other service determines if you
need short or long DTMF tones. If the service is digital which
most are these days, normal DTMF will almost always work.
However, some new systems and almost older systems require
long DTMF tones.
To set the tone length:
1. From Standby mode, press <Menu> softkey for the Main menu.
2. Select 1:Settings.
3. Select 2:Sounds.
4. Select 5:Tone Length.
5. Select Long or Short, and press <OK>.
Setting App. Volume
You can adjust Application sound volume and Vibration.
1. From Standby mode, press <Menu> softkey for the Main menu.
2. Select 1:Settings.
3. Select 2:Sounds.
4. Select 6:App. Volume.
5. Select 1:Sound for adjusting volume, 2:Vibrate for vibration on/off.
Sprint PCS Vision Settings
Enable/Disable Vision
Details Required!!!
Net Guard
The Net Guard requires you to take an extra step each time you
launch or exit the Browser. To change the Net Guard setting:
1. From Standby mode, press <Menu> softkey for the Main menu.
2. Select 1:Settings.
3. Select 3:Sprint PCS Vision and then 2:Net Guard.
4. Scroll to the desired option. The following options are
available:
. Off - to disable the Web Guard.
. On - to require an extra step when launching the