Filter
Top Products
Identifying Parts and Controls (Base Station)
5
Identifying Parts and Controls (Base Station)
1WIRELESS LED
Indicates the wireless function status.
Green: Connected with the LocationFree device on the 2.4 GHz
channel.
Turns green momentarily, then turns off for 3 seconds: Wireless is
enabled, but wireless communication with a LocationFree
device is not taking place.
2NETWORK LED
Indicates the connection status to an external network, such as the
Internet.
Green slow blinking: Attempting to connect.
Green: Connected to the network. The LED blinks quickly when
data is transmitted.
Off: Not connected.
3NETAV LED
Indicates the connection status with the LocationFree device.
Green fast blinking: NetAV authentication has failed.
Green slow blinking: Attempting to connect with NetAV.
Green: Connected with NetAV.
Amber blinking: Updating Dynamic DNS.
Amber: Dynamic DNS failure.
Off: Not connected.
Red: The Base Station is being initialized.
4SETUP MODE LED (1 page 11)
Amber: The Base Station is in Setup mode.
Amber blinking: Easy registration is possible.
5POWER LED (1 page 12)
Green: The power is on.
Red blinking: A malfunction has occurred.
6POWER button (1 page 12)
Turns the Base Station power on and off.
7LAN port
Connect a LAN cable.
8BASE STATION RESET button (1 page 48)
Initializes all settings on the Base Station to the factory defaults.
9SETUP MODE button (1 page 11)
Press to register LocationFree devices, or to make Base Station
settings.
0IN 2 (AUDIO/VIDEO) terminal (1 page 8)
Connect the scart to A/V cable (supplied) or the A/V cable (RCA
pin cable, supplied).
qaDC IN jack (1 page 12)
Connect the AC power adapter (supplied).
qsIN 1 (AUDIO/VIDEO) terminal
(
1
page 8)
Connect the scart to A/V cable (supplied) or the A/V cable (RCA
pin cable, supplied).
qdIR BLASTER port (1 page 9)
Connect the IR Blaster (supplied).
Front
1
2
3
5
4
6
Rear