Filter
Top Products
White Paper T100/T102
23 September 2002
User interaction with SIM AT
DISPLAY TEXT
Text of up to 160 characters (80 UCS coded) is
supported.
Text clearing times
• 6-20 seconds. 60-second timeout limit for the
user to clear the text.
‘Key’ responses
• ‘Long NO’ – Proactive session terminated by
user.
• ‘NO’ – Backward move in proactive session.
Any other key clears display if the command is
performed successfully.
GET INKEY
Prompt for a one-character input. Pressing ‘YES’
without entering a character gives warning mes-
sage “Minimum 1 character”.
‘Key’ responses
• ‘CLR’ clears current character.
• ‘Long NO’ terminates the proactive session.
• ‘NO’ – Backward move in proactive session.
• ‘YES’ – Command performed successfully.
GET INPUT
Prompt for character input. Pressing ‘YES’ without
entering a character gives warning message “Mini-
mum ‘no.’ characters”. The phone will refuse to
accept further input when maximum response
length is exceeded.
MMI Maximum Response lengths
• Digits Only – 160 characters
• SMS default alphabet characters – 160 charac-
ters
• Hidden Characters (digits only) – 20 characters
‘Key’ responses
• ‘CLR’ clears current character/characters.
• ‘Long No’ terminates the proactive session.
• ‘NO’ – Backward move in proactive session.
• ‘YES’ – Command performed successfully.
Subaddress DTMF support Yes
'00' = set up call, but only if not currently busy on
another call
Yes
'01' = set up call, but only if not currently busy on
another call, with redial
Yes
'02' = set up call, putting all other calls (if any) on
hold
Yes
'03' = set up call, putting all other calls (if any) on
hold, with redial
Yes
'04' = set up call, disconnecting all other calls (if any) Yes
'05' = set up call, disconnecting all other calls (if any),
with redial
Yes
SET UP MENU Yes
SMS PP DOWNLOAD Yes
Service Mode Support in
T100/T102