Filter
Top Products
White Paper T100/T102
24 September 2002
REFRESH
A requirement to turn the phone off and then on
again can be sent to the user with the text ‘Opera-
tor has updated your SIM! Restart phone to
update!’.
SELECT ITEM
Scroll to highlight item for selection. The maximum
number of items supported by the phone within
one Select Item command is 30.
‘Key’ responses
• Down arrow – Scroll down list.
• Up arrow – Scroll up list.
• Long ‘No’ terminates proactive session.
• ‘NO’ – Backward move in proactive session.
• ‘YES’ – Command performed successfully.
SEND SHORT MESSAGE
Default message “Sending message, please wait”
can be replaced for the Alpha Identifier text, or sup-
pressed completely if a null text is provided.
Responses are “MESSAGE FAILED” or “MESSAGE
SENT”.
‘Key’ responses
• Long ‘No’ or ‘NO’ terminates the proactive ses-
sion.
SET UP CALL
If the ME is on a call when the command ‘Set up
Call, putting all other calls on hold’ is sent, the user
will see the text ‘Setting up a call current call will be
held’. If the ‘YES’ key is pressed the current call will
be put on hold and the new call set up. If the ME is
on a call when the command ‘Set Up Call, discon-
necting all other calls’ is sent, the user will see the
text ‘Setting up a call current call will be discon-
nected’. If the ‘YES’ key is pressed the current call
will be disconnected and the new call set up.
SET UP MENU
Incorporates a SIM Application Toolkit Menu Item
into the ME’s main menu structure. From the
standby display the right or left arrow buttons can
be pressed to select the Menu Items. (Note: The
SIM AT menu option is found in the ‘Extras’ menu.)
If an Alpha Identifier is supplied in the Set Up Menu
command this is used as the SIM AT entry in the
ME’s main menu. If no alpha identifier is supplied
and only one item provided, then this item is used
as header. If no alpha identifier is supplied and sev-
eral items are found in the menu, a default title is
used. If the SIM AT Menu Item is selected using the
‘YES’ key all the items sent in the Set Up Menu
command will be available for selection, in the
same way as the Select Item command. A limit of
30 menu items has been set within this command.
‘Key’ responses
• Down arrow – Scroll down list.
• Up arrow – Scroll up list.
• Side key: Scrolls the menu.
• ‘YES’ – Envelope (Menu Selection).
Chinese versions
The T100 comes in different Chinese versions, the
T100 for Hong Kong, Singapore, Malaysia and
Taiwan, and the T102 for China Mainland. The only
difference between these Chinese versions is that
they support different languages and input
methods.
Both the T100 version and the T102 contains a
Lunar calendar.
For more information about the Chinese versions,
see “Standard language configurations” on
page 29.