Filter
Top Products
Not for commercial use
– Ericsson Inc.
Menu Descriptions 33
Note! You will be prompted to enter your security code to
enter the Calling Card 1 and Calling Card 2 sub-
menus.
Setting Up Your Calling Cards
To set up your calling cards, make sure you have the
Calling Card Access Numbers (numbers provided by
your long distance carrier) and the Verification Numbers
(numbers you must enter to allow the calling card call to
be completed)
To set up your calling cards, complete the following
steps.
Press Ñ or Ô from the Standby screen to access the
main menu.
Press
<(6
when the PHONE LISTS menu is high-
lighted.
Press Ñ or Ô until the Calling Card 1 or Calling
Card 2 submenu is highlighted.
Press
<(6
to open one of the Calling Card sub-
menus.
You are prompted to enter your security code.
Press Ñ or Ô until Verif Number is highlighted.
Press
<(6
to select Verif Number.
Enter the calling card verification number.
Press
<(6
to store the number.
Press Ô to highlight Access Number.
Press
<(6
to select Access Number.
Enter the calling card access number.
Press
<(6
to store the number.
Changing the Domestic or International
Calling Pattern
If your long distance carrier requires a unique dialing
sequence, you may need to change the calling pattern.
The calling pattern determines when the numbers are
transmitted by your phone. The default calling pattern
is:
• Access number
• Stop
• Verification number
• Stop
• Area code and phone number
To change the calling pattern:
After Step 11 under Setting Up Your Calling Cards,
press Ô until Domestic or International is
highlighted.
Press
<(6
to select the highlighted option.
Press Ô to scroll through the calling pattern order.
To change the calling pattern order, press Ô until
the the setting you want to change is highlighted.
Press
to scroll through the options for that setting.
When you have the calling pattern order you want,
press
<(6
to store the selection.
900677ae.book Page 33 Friday, August 4, 2000 4:09 PM