Filter
Top Products
Not for commercial use
– Ericsson Inc.
38 Menu Descriptions
Note! You will be prompted to enter your security code to
enter the Lock Dial submenu.
Lock Receive
The Lock Recv submenu allows you to restrict incom-
ing phone calls. The two options are Allow and Restrict.
If Restrict is selected, the phone does not ring for incom-
ing calls.
Note! You will be prompted to enter your security code to
enter the Lock Recv submenu.
Settings Menu
Security Code
The SecurityCode submenu allows you to gain access to
certain functions, such as call restrictions and calling
card numbers. The factory-programmed code is 0000.
You can change this code to provide maximum security
for your phone. If you forget your security code, contact
your service provider for assistance.
Note! You will be prompted to enter your security code to
enter the SecurityCode submenu.
Power On Lock
The PowerOn Lock submenu restricts you from mak-
ing calls each time you turn the phone on. To unlock
the phone, enter the security code.
If a call is received while PowerOn Lock is active, you
must enter your security code to answer the call.
Note! You will be prompted to enter your security code to
enter the PowerOn Lock submenu.
Keypad Lock
The Keypad Lock submenu restricts you from using the
keypad. The keypad remains locked until you do one of
the following:
• Turn the phone off by pressing and holding
12
,
and then turn the phone back on by again pressing
and holding
12
.
• Press Ñ or Ô, highlight the on or off setting you
want to choose, and press
<(6
to select.
• Receive a call (after the call is completed, the key-
pad is returned to the locked state).
Note! The Keypad Lock feature prohibits emergency number
access (911) until unlocked.
Ñ or Ô 4
Ñ or Ô and * toggles Keypad Lock
on and off.
900677ae.book Page 38 Friday, August 4, 2000 4:09 PM