Filter
Top Products
SpectraLink Corporation NetLink e340/h340/i640 Wireless Telephones and Accessories User Guide
Part Number: 72-1004-01-H.doc Page 15
Ring delay
Determines how long the vibrate cadence will play before the
audible ring starts. If the Ring Cadence or Vibrate Cadence is
turned off, the Ring Delay option will not appear on the menu.
Select the desired length of Ring Delay:
No delay: the audible ring starts as soon as the handset starts to
vibrate.
5 second delay: the handset vibrates for five seconds before
the audible ring starts.
10 second delay: the handset vibrates for ten seconds before
the audible ring starts.
Auxiliary ring 1
Auxiliary ring 2
Designed to be utilized by OAI applications, enabling the user
to set a distinctive ring for these applications. Select the desired
Auxiliary Ring
Phone options
Noise mode
Provides options that describe the noise level in your
environment. Selecting the correct option will adjust the
handset to account for background noise. Select
Normal for
most office environments;
High for moderate background
noise; or
Severe for extremely noisy conditions. Use of the
non-Normal modes is not recommended unless you are in a
loud environment or you may find it difficult to be heard on
your handset.
Key tones
Determine if tones play when keys are pressed. Key tones are
enabled by default. Turn key tones on or off.
Warning tones:
Play to alert user to various conditions, such as system up or
down, out of range, etc. These tones are enabled by default.
Turn warning tones on or off.
Display contrast
Adjusts the display for different lighting situations. Set contrast
by pressing the
Up and Down side buttons until the desired
contrast is displayed and then pressing the
OK softkey.
Keypad autolock
Locks the keypad automatically when in standby mode. The
automatic locking function of the keypad may be disabled (the
default) or adjusted for a delay before locking. Select desired
keypad autolock delay:
Disable: the keypad will not lock.
5 seconds: the keypad will lock in five seconds
10 seconds: the keypad will lock in ten seconds
20 seconds: the keypad will lock in 20 seconds
System info
Phone IP address
Displays the IP address currently assigned to the handset. This
number may not be edited.
Gateway IP address or
Server IP address
Displays the IP address currently assigned to the NetLink
Telephony Gateway (in SRP) or the SVP Server IP (in other
protocols—see appendices).
Firmware version
Displays the software version running the handset.