Sunway GSM 900 Cell Phone User Manual


 
This is the Internet version of the user's guide. © Print only for private use.
5
Getting started
To insert the SIM card and charge
the battery
1 Insert the SIM card. Make sure the SIM card
is placed under the silvery holders.
2 Place the battery on the back of the phone with
the label side up and the connectors facing
each other.
3 Place the back cover as shown in the picture
and slide it into place.
4 Open the connector cover and connect
the charger to the phone at the flash symbol.
The flash symbol on the charger plug must
face upwards.
5 It may take up to 30 minutes before the battery
icon appears on the screen.
6 Wait approximately 4 hours or until the battery
icon indicates that the battery is fully charged.
If you do not see the battery icon after this
time, press any key or to activate the screen.
7 Remove the charger by tilting the plug upwards.
PIN (Personal Identity Number)
You may need a PIN (Personal Identity Number)
to activate the services in your phone. Your PIN
is provided by your service provider. When you
enter your PIN, the digits are hidden with an *,
unless your PIN starts with the same digits
as an emergency number, for example 112.
30 min.
4 h.