Filter
Top Products
This is the Internet version of the user's guide. © Print only for private use.
Setting up WAP 39
GPRS settings that are available:
• APN (Access point name address) – the address
of the external data network you want to connect
to, either an IP address or a text string.
• User ID – your user id to log on to the external
data network.
• Password – your password to log on to the external
data network.
• Pwd. Request (Password request) – if this setting
is on, you are asked for a password each time you
log on to the external data network.
• Allow Calls (Preferred service) – if you want
to be able to accept incoming calls during
a GPRS session, select Automatic. If not,
select GPRS Only.
• IPAddress – the IP address that the phone uses
when communicating with the network. If you
do not enter an address, the network provides
you with a temporary IP address.
• DNS Address – if the network does not provide
the IP address to the DNS server automatically,
you may enter it here.
• Advan. Settings (Advanced settings) – these are
optional. Consult your network operator.
GSM
GSM settings include some settings that are
similar to GPRS settings and some that are
GSM-specific as follows:
• Phone Number – the phone number
of your Internet service provider.
• Data Rate – select the speed you want for the
connection.
• Dial Type – select analog or ISDN connection.
To create a data account manually
1. Scroll to Connect,
YES, Data Comm., YES,
Data Accounts,
YES, Add account?, YES.
2. Select an account type for access.
3. Enter a name for the data account.
4. Enter the settings that you have received from your
network operator or service provider.
Confirm each setting by pressing
YES.
5. Scroll to Save?,
YES.
To edit a data account
1. Scroll to Connect,
YES, Data Comm., YES,
Data Accounts,
YES.
2. Select a data account,
YES.
3. Select Edit.