Filter
Top Products
2
Compatible Bases
This handset is compatible with Uniden's 5.8 GHz Digital
Expandable phone system: the TRU9300 series.
Please visit our website at www.uniden.com for the most up-to-
date list of compatible bases.
Installing the Accessory Handset
Checking the Package Contents
Make sure your package contains the following items. If any
items are missing or damaged, contact our Customer Service
Hotline. See back cover page for contact information.
• Cordless Handset • Beltclip
• Charging Cradle • Printed Material
• AC Adapter, model # AD-0005
Input: 120V AC 60 Hz Output: 9V DC 210 mA
• Rechargeable NiMH Battery Pack, model # BT-909
Capacity: 600 mAh, 3.6V
Installing the Battery
Follow the steps below to install the
rechargeable battery pack.
Using the nger indentation, press in on
the battery case cover and slide it down
to remove it.
Plug the battery connector into the
battery compartment jack. Be sure to
match the red and black wires to the
label near the jack.
Gently pull on the battery wires. If the
battery connector comes loose, try
connecting it again.
Replace the battery case cover and slide
it up until it clicks into place.
Note: Use only the Uniden BT-909 rechargeable battery pack
supplied with your cordless telephone.
1)
2)
3)
4)