Filter
Top Products
22
ANSWERING SYSTEM SETUP
Day and Time
During initial setup, or after a power failure, the day and time default is set to Monday,
12:00am. The display will flash "CL" to indicate day and time need to be set.
1. Press MENU unit you hear, "Set day
and time."
2. Press SELECT until the correct day
is announced.
3. Press TIME/SET to confirm your
choice.
4. Press SELECT until the correct hour
is announced.
5. Press TIME/SET to confirm your
choice.
6. Press SELECT until the correct minute
is announced. Holding the key
continuously will increase the minutes
by 10 minute steps.
7. Press TIME/SET to confirm your
choice. You will hear an announcement
of the day and time.
Set Audible Message Alert
If you want your Answering System to beep once every 10 seconds to notify you when new
messages have been received, set Audible Message Alert to ON. Otherwise, it is preset to
OFF.
1. Press MENU until you hear "Set
Audible Message Alert."
2. Press SELECT until the desired setting,
(ON or OFF) is announced.
3. Press TIME/SET to confirm your
choice. The voice prompt of "Audible
Message Alert On" or "Audible Message
Alert Off" will be heard.
Itad Operation