Filter
Top Products
38
FCC and ACTA Information
If this equipment was approved for connection to the telephone network prior to July 23,2001. It
was registered with the Federal Commissions (FCC) in accordance with Part 68 of its rules. the
equipment was approved after that date, it complies with the Part 68 rules and with Technical
Requirements for Connection of Equipment to the Telephone Network adopted by the Administrative
Council for Terminal Attachments (ACTA). We are required to provide you with the following
information.
1. Connection and use with the nationwide telephone network
The plug and jack used to connect this equipmet to the premises wiring and the telephone
network must comply with the applicable Part 68 rules and technical requirements adopted
by ACTA. A compliant telephone cord and modular plug is provided with this product. It
is designed to be connected to a compatible modular jack that is also compliant. An RJ11
jack should normally be used for connecting to a single line and an RJ14 jack for two lines.
See Installation Instructions in the user's manual. This equipment may not be used with
Coin Telephone Lines or with Party Lines.
2. Product identifier and REN information
The label on the back or bottom of this equipment contains, among other things, an identifier
indicating product approval and the Ringer Equivalence Number (REN). This information must
be provided to your local telephone company upon request, For equpment approved prior
to July 23,2001, the product identifier is preceded by the phrase "FCC Reg No." and the
REN is listed separately. For equipment approved after that date, the product identifier is
preceded by "US" and a colon (;), and the REN is encoded in the product identifier as the
sixth and seventh characters following the colon. For example, the product identifier US:
AAAEQ03T123XYZ would indicate an REN of 0.3.
The REN is used to determine how many devices you may connect to your telephone line
and still have them ring when you are called. In most , but not all areas, the sum of all
RENS should be five (5.0) or less, You may want to connect your local telephone company
for more information.
3. Repair instructions
If the equipment is malfunctioning, it must be unplugged from the modular jack until the
problem has been corrected. Repairs to this telephone equipment can only be made by the
manufacturer or its authorized agents. For repair procedures, follow the instructions outlined
under the Limited Warranty.
4. Rights of the telephone company
If this equipment is causing harm to the telephone network, the telephone company may
temporarily discontinue your telephone service. The telephone company is required to notify
you before interrupting service. If advance notice is not practical, you will be notified as
soon as possible. You will be given the opportunity to correct the problem and the telephone
company is required to inform you of your right to file a complaint with the FCC. Your telephone
company may make changes in facilities, equipment, operation, or procedures that could
affect the proper functioning of this product. The telephone company is required to notify
you if such changes are planned.
5. Hearing aid compatibility
If this product is equipped with a corded or cordless handset, it is hearing aid compatible.
6. Programming/testing of emergency numbers
If this product has memory dialing locations, you may choose to store police, fire department
and emergency medical service telephone number in this locations. If you do, please keep
three things in mind:
FCC AND IC REGULATIONS
ADDITIONAL INFORMATION