A SERVICE OF

logo

32 PowerMonitor 1000 Unit
Rockwell Automation Publication 1408-IN001E-EN-P - September 2013
3. Press <up> or <down> once.
Program appears in the display. Press <enter>.
4. Press <enter> if the password has not been changed from the default (0000).
If the password has been changed, then enter the correct password.
When the correct password is entered, Program Setup appears in the display. The power
monitor is now in Program mode.
If an incorrect password is entered, Invalid Password appears. Press any button to try
again.
PowerMonitor 1000
RS-485
STATUS
RX TX Mod Net
Password
0000
PowerMonitor 1000
RS-485
STATUS
RX TX Mod Net
Program
Setup