PowerMonitor 1000 Unit 69
Rockwell Automation Publication 1408-IN001E-EN-P - September 2013
Certifications
The power monitor adheres to these certifications.
EtherNet/IP Network Conformance Testing
All power monitor products equipped with an EtherNet/IP network communication port bear
the mark shown. This mark indicates the power monitor has been tested at an Open Device
Vendor Association (ODVA) independent test lab and has passed the EtherNet/IP network
conformance test. This test provides a level of assurance that the power monitor will interoperate
with other conformance tested EtherNet/IP network devices (including devices from other
vendors). One representative device from the power monitor EtherNet/IP network family of
devices, the 1408-EM3-ENT, has been tested by ODVA by using EtherNet/IP Conformance
Test, version A2.8. The ODVA website http://www.odva.org
maintains a list of products that
have passed the conformance test at one of their test labs.
UL/C-UL
UL 508 listed, File E56639, for Industrial Control Equipment and C-UL Certified.
CE Certification
If this product bears the CE marking, it is approved for installation within the European Union
and EEA regions. It has been designed to meet the following directives.
EMC Directive
This product is tested to meet Council Directive 89/336/EEC Electromagnetic Compatibility
(EMC) and the following standards, in whole, documented in a technical construction file.
EN55011 – Radiated Electromagnetic Emissions
EN55011 – Conducted Emissions
ENV50204 – RF 900MHz Keyed Carrier
EN61000 – Immunity
This product is intended for use in an industrial environment.
