1
10.4.13 VITC Line Menu
The IVS can convert the timecode, which can also be
displayed man-readable in the video image, into machine
readable VITC (Vertical Interval Time-Code) and place it
in non visible video lines.
Note: The timecode count that is used (“lm related“ or
“video related timecode“) depends on the
settings of the line “Frame Counter“ in the sub
menu “Timecode“ (see chapter 10.4.10).
Note: VITC is only output if timecode is actually
recorded on lm. If no timecode is recorded on
lm for example because the camera is not
running at a timecode speed, no VITC is available.
Note: The White Line has priority over VITC lines. If
the same line is selected for White Line as well
as for VITC, White Line will appear.
• Enter the VITC Line Menu from the Main Menu.
Changes made to settings are immediately activated.
Check all settings on a correctly adjusted monitor.
MENU VITC LINE
-> - VITC LINE ON
- POSITION 1 10
- POSITION 2 12
- EXIT
A1
Video-Ait-Sytem
