P. 28 User Guide
Please note that the MCX-100 channel expander is required in order to add customized features. The Option
1 or 3 in Mode 3, Function 4 must also be selected.
AUX ¾ AUX ¾ AUX ¾.............................LOCK: customized feature 1
AUX ¾ AUX ¾ AUX ¾.............................UNLOCK: customized feature 2
AUX ¾ AUX ¾ AUX ¾.............................TRUNK: customized feature 3
AUX ¾ AUX ¾ AUX ¾.............................START/STOP: customized feature 4
You can customize the system as to personalize these multi-level features in an order that best
suits the user. Your options are:
Option 1:
Level 1
(requires pressing the AUX button 1X) Æ Multi car operation
Level 2
(requires pressing the AUX button 2X) Æ Basic features
Level 3 (requires pressing the AUX button 3X) Æ Customized features
Option 2:
Level 1
(requires pressing the AUX button 1X) Æ Basic features
Level 2
(requires pressing the AUX button 2X) Æ Multi car operation
Level 3 (requires pressing the AUX button 3X) Æ Customized features
Option 3:
Level 1
(requires pressing the AUX button 1X) Æ Customized features
Level 2
(requires pressing the AUX button 2X) Æ Multi car operation
Level 3 (requires pressing the AUX button 3X) Æ Basic features
Option 4:
Level 1
(requires pressing the AUX button 1X) Æ Basic features
Level 2
(requires pressing the AUX button 2X) Æ Customized features
Level 3 (requires pressing the AUX button 3X) Æ Multi car operation
Example: If the multi-level features have been modified from their default state to option 3, the
setup would be as follows:
For “Basic features”:
x To access the AUX 2 feature, the user needs to press on the AUX button three (3) times followed
by the LOCK button.
x To access the status request feature, the user needs to press on the AUX button three (3)
times followed by the TRUNK button.
x To access cold weather mode, the user needs to press on the AUX button three (3) times
followed by the START/STOP button.
