A SERVICE OF

logo

Figure 26. Hard drive/SSD assembly orientation for even and odd-numbered slots
1. hard drive/SSD assembly orientation for
even numbered slots (with connector side
of drive facing up)
2. storage sled
3. hard drive/SSD assembly orientation for
odd numbered slots (with connector side
of drive facing down)
2. Slide the drive assembly into the slot until the drive connector engages with the connector on the
backplane.
3. Close the drive release handle until it clicks into place, to lock the hard drive/SSD.
Next steps
Close the drive drawer.
Related Links
Removing a hard drive/SSD assembly
Opening the drive drawer
Closing the drive drawer
32