Appendix B: Client Setup for 802.1x, WPA, and WPA-PSK
143
Enabling WPA Authentication and Security
The first four steps are the same
as the setting for 802.1x
authentication, please refer to
the previous part.
5. Select the Association Tab,
and enter the SSID of the AP.
(e.g., Please)
6. Choose WPA from the drop
down menu for the Network
Authentication, and TKIP for
Data encryption.
7. Click OK, and then select the
Authentication Tab.
8. The Enable network access
control using IEEE 802.1X is
selected by default, and
Protected EAP (PEAP) is
selected from the EAP type.
9. Click Properties under EAP
type.
